Intel Rapid Storage Technology Driver 12th Gen:
Intel Rapid Storage Technology is software designed to increase the performance of storage devices on your computer system. It’s available on many laptops and PC systems with Intel processors. The RST driver enables you to connect all of your HDD and SSD drives together to read data more quickly, while simultaneously decreasing disk failure risk over time. So, follow the provided link URL below to download the Intel Rapid Storage Technology Driver 12th Gen.
Download Intel Rapid Storage Technology Driver 12th Gen (Here)
Installation Of Driver:
Intel Rapid Storage Technology (Intel RST) is an inbuilt solution on certain Intel chipsets that enables users to group multiple disks into one logical volume for increased performance and redundancy. Commonly referred to as Redundant Array of Independent Disks (RAID), RST offers several levels of redundancy that ensure data remains protected during normal operation as well as possible catastrophic events.
For RST to work properly, a system with an Intel(R) processor must be available. RST supports standard SATA drives, Serial ATA Attached SCSI (SAS) devices, solid state drives as well as RAID volumes and Intel Optane(tm) memory volumes. To set up your supported system for RST use, the BIOS needs to be configured so RST is activated, or seek advice from your system vendor regarding setup procedures.
If your computer is equipped with RST, installing the appropriate drivers is key for its proper functionality. Download them from either Intel’s website or directly from your system manufacturer – once downloaded follow these steps to install it correctly on your system.
To install the IRST driver during Windows installation, first download and save to a bootable USB drive the latest x64 version of Intel RST F6 Driver from MSI’s product support page. When prompted about where you wish to install Windows OS, connect a USB flash drive and choose “Load driver”.
Driver Troubleshooting:
Intel Rapid Storage Technology Driver is a SATA AHCI and firmware-based RAID solution built into many Intel chipsets, making it essential to load this driver during Windows installation so disks and/or RAID arrays are recognized by Windows. Unfortunately, Windows sometimes fails to locate IRST during the setup process leaving your computer either bootless or inoperable; when this occurs there may be several potential solutions.
One way is to disable the VMD controller in BIOS. To do this, turn on your laptop and press the Del key when the MSI logo appears; navigate into BIOS Advanced screen; locate [VMD setup menu]3; change [Enable VMD controller]4 option from [Enable]4 to [Disabled].
An alternative method of installing drivers in compatibility mode involves downloading them from the support page for your particular computer model and extracting them. Once done, move these extracted files onto a USB stick and insert it during the Windows installation process when asked where you wish to install Windows; when asked “Where would you like to install Windows?,” choose where your files were extracted; once complete you will be prompted to [Load Driver], which will load IRST driver and automatically detect hard drives/RAID arrays by operating system.
System Requirements:
Intel Rapid Storage Technology (RST) is a driver SATA AHCI and firmware-based RAID solution built into numerous Intel chipsets. However, RST should not be seen as an alternative or replacement to standard RAID controllers; nor can it be used to accelerate an existing array of hard drives or SSDs within it.
On systems containing RSTe features, it is not advised to install generic versions of this driver update. Instead, for optimal performance and compatibility it is advisable to utilize RSTe drivers provided by your system manufacturer – these drivers can be customized specifically to your system design for improved results.
To run Intel RST and utilize Intel Optane memory system acceleration, as well as enable system acceleration using this feature, a motherboard capable of supporting Intel 12th Generation processors must also exist and support this feature within your BIOS. Please contact your system or motherboard vendor for more details on this matter.
Dell Windows 10 reinstall media may not always include the Intel RST driver required to detect storage devices on your computer, in such instances you must manually install this IRST driver during the reinstallation process as detailed herein. This article offers guidance for doing just that.
The RST driver package downloads to a folder on your hard disk or USB device. Unzip it in an easily identifiable place for easier finding when installing Windows; once setup begins, simply select the IRST folder as the destination driver during the setup process.
FAQ:
Intel Rapid Storage Technology (IRST) drivers help optimize performance and reliability on systems using Serial ATA hard disks or solid-state drives, supporting RAID configurations as well.
The AHCI specification outlines how computer storage is accessed and managed, replacing several older specifications to support advanced features required by current and emerging SSD technologies.
Intel reported a potential security vulnerability in certain Intel(r) Rapid Storage Technology software that could allow an attacker to gain unauthorized access and escalate privilege. HP suggests upgrading Intel(r) RST software for your model as indicated in the Product Impact section below.
If you own an MSI notebook with a 13th Gen processor, load the IRST driver during Windows setup to ensure that its hard drives or RAID arrays are recognized. You can do this from MSI’s website by downloading, extracting, and saving a driver package to a USB storage device; at step two during installation simply click “Load driver” to install this driver.